DASBET 7L Fluid Extractor Manual Oil Changer Vacuum Hand Operated Engine Oil Change Fluid Extractor …

55.95 $

Including 4 tubes
4mm×39 inches
6mm×39 inches
8mm×37.7 inches
10mm×39.4 inches

How To Use 7L Oil Extractor?
1) Warm up the oil by running the engine. This will allow the contaminates to mix and to suspend in the oil. Remove the dipstick. Note: If you can’t hold the dipstick comfortably in your hands, then the oil is too hot! Wait for the oil to cool off a bit.
2) Select and insert the appropriate diameter extraction tube into the dipstick pipe until it touches the bottom of the oil pan. Connect the main tube to the top of the unit and to the extraction tube.
3) Pump the handle 4 to 10 times in a row to start the vacuum. The unit will extract the oil automatically. Continuous pumping is not required.
4) After all the oil has been extracted, press the release valve located at the top of the unit for 5 seconds. Remove the main tube. When pouring the oil into a container, hold the pump as in the photo and pour gently. Do not hold it upside down ! Bring the used oil to a recycling depot.【APPLICABLE】The 7 liter oil extractor is constructed from composite materials and suitable for the extraction of all types of engine and lubricating oils from cars, motorcycles, marine engines, stationary engines and industrial machinery. It is also suitable for low viscosity fluids such as water.
【FEATURE】 Portable fluid extractor empties in 16 pumps or less No power source needed. By manpower to push and have vacuum pressure Warm or cold fluid extraction
【FEATURE】 Includes extraction tube kit Muti-size hose: change different sizes for different condition Storage more, improve work efficiency
【INCLUDING】 1 X 7L Oil Extractor 1 X Φ10mm Nylon Hose 1 X Φ8mm Nylon Hose 1 X Φ6mm Nylon Hose 1 X Φ4mm Nylon Hose 1 X Instruction Manual

Category:

Description

Together with Four tubes
4mm×39 inches
6mm×39 inches
8mm×37.7 inches
10mm×39.Four inches

How To Use 7L Oil Extractor?
1) Heat up the oil by operating the engine. This can enable the contaminates to combine and to droop within the oil. Take away the dipstick. Word: If you cannot maintain the dipstick comfortably in your arms, then the oil is simply too scorching! Look forward to the oil to chill off a bit.
2) Choose and insert the suitable diameter extraction tube into the dipstick pipe till it touches the underside of the oil pan. Join the primary tube to the highest of the unit and to the extraction tube.
3) Pump the deal with Four to 10 occasions in a row to start out the vacuum. The unit will extract the oil routinely. Steady pumping just isn’t required.
4) After all of the oil has been extracted, press the discharge valve positioned on the high of the unit for five seconds. Take away the primary tube. When pouring the oil right into a container, maintain the pump as within the photograph and pour gently. Don’t maintain it the other way up ! Carry the used oil to a recycling depot.【APPLICABLE】The 7 liter oil extractor is constructed from composite supplies and appropriate for the extraction of all forms of engine and lubricating oils from vehicles, bikes, marine engines, stationary engines and industrial equipment. It is usually appropriate for low viscosity fluids similar to water.
【FEATURE】 Transportable fluid extractor empties in 16 pumps or much less No energy supply wanted. By manpower to push and have vacuum stress Heat or chilly fluid extraction
【FEATURE】 Consists of extraction tube equipment Muti-size hose: change completely different sizes for various situation Storage extra, enhance work effectivity
【INCLUDING】 1 X 7L Oil Extractor 1 X Φ10mm Nylon Hose 1 X Φ8mm Nylon Hose 1 X Φ6mm Nylon Hose 1 X Φ4mm Nylon Hose 1 X Instruction Guide