(2) 50mm (2″) 5×4.5 to 5×4.5 Black Wheel Spacers fits Ford Mustang Edge Ranger Explorer

43.25 $

THESE SPACERS WILL BOLT UP TO THE FOLLOWING VEHICLES


    1967-2014 Ford Mustang
    2007-2014 Ford Edge
    2003-2004 Ford Mach 1
    1991-2011 Ford Crown Victoria
    1982-1990 Ford Bronco (Does not fit XLT Model)
    1981-2011 Ford Ranger
    1991-2015 Ford Explorer

ADDITIONAL INFORMATION

  • Please ensure that the your vehicle has the same studs as the adapters, otherwise additional lugs WILL BE required
  • Make sure that all adapters get a FULL 6-8 Turns of the Lugs when Tightening, Failure to do so, can result in damage to your vehicle
  • Installation needs to be performed by a trained professional

It’s Possible that you OEM Studs are longer than the spacer is thick, if so you have a few options:

  1. Your lugs studs will need to be shortened by grinding them down
  2. You can replace your studs will shorter studs
  3. if you wheels have cavities in the backside, between the mounting holes, then you should be OK (will need to make sure flush)

ALWAYS ENSURE THAT THERE IS NO GAP BETWEEN THE SPACERS AND THE HUB OF THE WHEELS

2x Brand NEW BLACK Wheel Adapters Vehicle Bolt Pattern 5×4.5 Wheel Bolt Pattern 5×4.5 Hub Bore 82.5mm Thickness: 2 inch (each spacer) Thread Pitch: 1/2″ x 20
REQUIRED that youCheck your vehicle compatibility in Product Description BEFORE buying
T6 6061 Billet Wheel Adapters 10.9 Grade Steel Threads
Mainly used to give your vehicle an agressive stance, and will help with any clearance issues (if present)
CNC Machined Usings Aerospace Aluminum

Description

THESE SPACERS WILL BOLT UP TO THE FOLLOWING VEHICLES


    1967-2014 Ford Mustang
    2007-2014 Ford Edge
    2003-2004 Ford Mach 1
    1991-2011 Ford Crown Victoria
    1982-1990 Ford Bronco (Does not fit XLT Model)
    1981-2011 Ford Ranger
    1991-2015 Ford Explorer

ADDITIONAL INFORMATION

  • Please ensure that the your vehicle has the same studs as the adapters, otherwise additional lugs WILL BE required
  • Make sure that all adapters get a FULL 6-8 Turns of the Lugs when Tightening, Failure to do so, can result in damage to your vehicle
  • Installation needs to be performed by a trained professional

It’s Possible that you OEM Studs are longer than the spacer is thick, if so you have a few options:

  1. Your lugs studs will need to be shortened by grinding them down
  2. You can replace your studs will shorter studs
  3. if you wheels have cavities in the backside, between the mounting holes, then you should be OK (will need to make sure flush)

ALWAYS ENSURE THAT THERE IS NO GAP BETWEEN THE SPACERS AND THE HUB OF THE WHEELS

2x Brand NEW BLACK Wheel Adapters Vehicle Bolt Pattern 5×4.5 Wheel Bolt Pattern 5×4.5 Hub Bore 82.5mm Thickness: 2 inch (each spacer) Thread Pitch: 1/2″ x 20
REQUIRED that youCheck your vehicle compatibility in Product Description BEFORE buying
T6 6061 Billet Wheel Adapters 10.9 Grade Steel Threads
Mainly used to give your vehicle an agressive stance, and will help with any clearance issues (if present)
CNC Machined Usings Aerospace Aluminum